Home > Technology > Training Shoes Midsole Air Pack Compression Resistance Test Method

Training Shoes Midsole Air Pack Compression Resistance Test Method

Added: (Tue Mar 23 2021)

Pressbox (Press Release) - Abstract: The i-Boxtek 1700 Box Compression Tester can test the overall compression resistance performance of the midsole air pack, while the XLW (PC) Auto Tensile Tester can perform key tests on the heat sealing edge of the air pack to find the weak point.
Keywords: air pack; training shoes; pressure resistance; auto tensile tester
Significance
Training shoes midsoles with air pack have good cushioning and shock absorption performance, which can effectively prevent knee injuries during exercise. Training shoes with air pack in their midsoles are popular in recent years. The key performing component is the air pack in the midsole. Under normal circumstances, the force on the sole during normal walking is 2 to 3 times the human weight, the force on the sole is even greater in sport activities such as running, jumping and playing basketball. Research shows that midsole air pack damage it is a common reason for the training shoes to be discarded. Therefore, good pressure resistance of the air pack is an important performance parameter that must be controlled for air pack training shoes.
Test method
At present, there isn’t a general test standard for the pressure resistance of air pack in training shoes industry. Corporate standards in shoe companies (such as Nike Sports (China) Co., Ltd. corporate standard Q/320585 NKY 202-2017 "Air-cushioned training shoes", Anta (China) Co., Ltd. corporate standard Q/ATZG 029-2018 "Air-cushioned training shoes" ) have few description of the test methods. Considering the producing principle of the air pack combined with experience, we can evaluate the pressure resistance performance of the midsole air pack using the method of testing the compression resistance and heat sealing strength of the air pack. The compression resistance test determines whether the air pack can withstand a preset pressure, and the heat sealing strength test determines the seal strength of air pack sealing edge.
1. Sample –air pack
2. Test condition
Laboratory environment: 23±2℃,50±10%RH
Test condition: 23.3℃,48%RH
3. Heat sealing strength
1)Test instrument
XLW (PC) Auto Tensile Tester is an electronic tensile tester specialized in testing the tensile and many other mechanical properties of various flexible packaging materials. Its high accuracy (0.5 grade) ensures the precision of the test result. The tensile tester has seven independent test procedures, various specifications of load cell, and seven test speeds, which can meet various test requirements.
2)Test procedure
 Cut open the air pack and unfold it, take 5 specimens of 15mm width at the sealing region
 Clamp the two ends of the specimen on the upper and lower grips of the tensile tester, as shown in Figure 3.
 Select the heat seal strength test mode, set the test parameters, and start the test at a speed of 300mm/min.
3) Test result
The heat-sealing strength of the sample fluctuates in different sealing region, the maximum value is 211.315N/15mm, and the minimum value is 143.226N/15mm.
4. Compression resistance
1)Test instrument
i-Boxtek 1700 Box Compression Tester is applicable for the compression, deformation, and stacking tests of packages with a certain volume (such as cartons), and can judge whether the packaging compression resistance is qualified. At the same time, it can also perform compression tests on plastic barrels (edible oil, mineral water), paper barrels, paper cans, container barrels (IBC barrels), hollow containers and other containers.
2)Test procedure
Place the sample between the test plates, select the test type "Stacking B test", set the holding pressure (3600S in this test), the holding time (1min in this test), and set other parameters before starting the test.
3)Test result
The air pack was not broken under the pressure of 3600, this means the compression resistance of the air pack can reach 3600N.

In summary, i-Boxtek 1700 Box Compression Tester can test the overall compression performance of the air pack, XLW (PC) Auto Tensile Tester can perform key tests on the heat sealing region of the air pack and find the weak areas. This test is only an example, other plastic packages that require pressure resistance can also be tested using this method.
i-Boxtek 1700 and XLW (PC) have wide range of applications in the determination of physical properties of plastic packaging, composite packaging and other materials. For more information please visit www.labthink.com. Jinan Labthink Instruments Co., Ltd. looks forward to further communication and cooperation with enterprises and institutions in the industry.

Jinan Labthink Instrument Co., Ltd.
No.144 Wuyingshan Road, Jinan, Shandong
+86-531-85068566

Submitted by:Labthink Instruments
Disclaimer: Pressbox disclaims any inaccuracies in the content contained in these releases. If you would like a release removed please send an email to remove@pressbox.com together with the url of the release.