Test Method for Gas Separation Effect of Membranes
Added: (Fri Dec 27 2019)
Pressbox (Press Release) -
Separation membrane is characterized by a selective permeability which is based on the permeability of different gases in the membrane to achieve gas separation. Compared with other gas separation technologies, the advantages of gas separation membranes include operation in ambient temperature, low energy consumption, environment friendly, no phase change, and small size. Therefore, gas separation membranes are used in nitrogen preparation, oxygen enrichment, hydrogen purification and recovery, and removal of acidic gases. It has also been widely used in recovery of organic steam and other fields. The factors affecting the performance of gas separation membranes include its permeability and selectivity. The permeability affects the separation efficiency of gas separation membranes. The selectivity affects the separation effectiveness of gas separation membranes. Effective gas separation membranes should have high permeability and selectivity. Separation coefficient is a key performance index for evaluating the selectivity of separation membranes. In this paper, the separation coefficient of a separation membrane sample was measured.
In this experiment, a gas separation membrane was used to test the separation effect of the sample on nitrogen (N2) and carbon dioxide (CO2).
The separation coefficient can be expressed by the ratio of permeability coefficient of separated gas. The gas permeability coefficients of N2 and CO2 can be measured by pressure differential method. The test process is based on ASTM D1434 (Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting).
The sample was tested on the VAC-VBS differential pressure gas permeability tester developed and manufactured by Labthink Instruments.
The VAC-VBS is equipped with pressure a sensor. Pressure differential enables gas permeation through the sample. Pressure sensor can monitor the change of gas pressure. The specific test process is as follows: the clamped sample divides the test chambers into and upper and lower chamber. The upper chamber is filled with a test gas under a certain pressure and the lower chamber is vacuum pumped to form a low-pressure environment. The test gas permeates through the upper chamber to the lower chamber. The pressure in the lower chamber varies with the increase of the amount of gas permeated. The gas permeability of the sample can be obtained by real-time monitoring of the pressure change in the low-pressure chamber with a pressure sensor. The gas permeability coefficient is the product of the gas permeability and the thickness of the sample.
In this experiment, a gas separation membrane was used to test the separation effect of the sample on nitrogen (N2) and carbon dioxide (CO2).
The separation coefficient can be expressed by the ratio of permeability coefficient of separated gas. The gas permeability coefficients of N2 and CO2 can be measured by pressure differential method. The test process is based on ASTM D1434 (Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting).
The sample was tested on the VAC-VBS differential pressure gas permeability tester developed and manufactured by Labthink Instruments.
The VAC-VBS is equipped with pressure a sensor. Pressure differential enables gas permeation through the sample. Pressure sensor can monitor the change of gas pressure. The specific test process is as follows: the clamped sample divides the test chambers into and upper and lower chamber. The upper chamber is filled with a test gas under a certain pressure and the lower chamber is vacuum pumped to form a low-pressure environment. The test gas permeates through the upper chamber to the lower chamber. The pressure in the lower chamber varies with the increase of the amount of gas permeated. The gas permeability of the sample can be obtained by real-time monitoring of the pressure change in the low-pressure chamber with a pressure sensor. The gas permeability coefficient is the product of the gas permeability and the thickness of the sample.