Home > Technology > Food Tray Lidding Film Peel Strength Measuring Method

Food Tray Lidding Film Peel Strength Measuring Method

Added: (Mon Mar 22 2021)

Pressbox (Press Release) - Due to its convenience, the disposable food tray is a popular packaging form of ready-to-eat meal currently. As the environmental awareness and attention to food safety increase, foamed food boxes faded out the market since the "Notice on Stopping the Use of Disposable Foamed Food Package in Catering Industry" in 2001. Plastic, paper and degradable materials are used instead. Plastic food trays are most commonly used.
Plastic food trays have many advantages such as waterproof, strong plasticity, easy production, light weight, and low cost. They are the main packaging form for supplying ready-to-eat food in hotels, flights and trains. For these ready-to-eat foods that need to be carried or transported, the lidding film and the food tray are sealed together to make the package convenient to carry, as well as being prevented from spilling. However, the sealing strength of the lidding film needs to be controlled in a proper range. If the sealing strength is not strong enough, it will not function as a sealed package, and if the seal is too strong, the lidding film will not be easy to peel open, and the food may be spilled due to excessive force when opening.
The sealing strength of food tray lidding film is mainly related to the heat sealing temperature, pressure and time.
 If the temperature is too high, the material will melt and be extruded under pressure, which reduces the thickness of the material and the heat sealing strength; if the temperature is too low, the material cannot melt and be sealed.
 Pressure is the force applied to seal together the lidding film and the food tray. If the pressure is too low, the lidding film and the food tray cannot be pressed tightly, and the sealing strength will be weak.
 The sealing time is also an important parameter. If the sealing time is too short, the package cannot be tightly sealed; if the time is too long, the material may be deformed, degraded or even damaged, and the sealing efficiency will be reduced.
Therefore, setting correct sealing parameters is of essence. Whether the lidding film sealing parameters are appropriate can be judged by a peeling force test. So, how is the sealing strength of the lidding film tested?
The sealing strength of the lidding film can be tested in two ways: one is to cut off the sealing edge to test the peeling strength; the other is to simulate human opening the package to test the opening force of the sealing. Both of these methods can be realized by the C610 Auto Tensile Test by Jinan Labthink Instruments Co., Ltd. The second method is more similar to user experience. Below is a food tray test sample:
1. Test environment: laboratory environment 23℃, 50%RH
2. Test requirements: test the maximum force required to open the package
3. Sample preparation: The sample for this opening force test is a lidding film sealed tray package of a ready-to-eat meal purchased on the market in a shape of a round plastic bowl
Test procedure
1) Install the fixture on the base of C610 Auto Tensile Tester.
2) Mount the sample on the fixture, and clamp the lidding film on the upper grip of C610 Auto Tensile Tester.
3) Select the peeling strength test program on the C610, set the test parameters, and start the test.
4) The results of this test are as follows:


The peeling force of the lidding film can be measured accurately with Labthink C610 Auto Tensile Tester, the opening performance and use experience of the package can be well presented as well. This is only an example of the lidding film peeling force test. Other similar Packages such as jelly cups or beverages containers can also be tested by this method.
In addition to the peeling force of the lidding film, the C610 Auto Tensile Tester is widely applied in professional test the elongation, peeling, deformation, tearing, heat sealing, bonding, puncture force, opening force, low-speed unwinding strength and pull-out force of plastic films, composite materials, flexible packaging materials, plastic soft tubes, adhesives, adhesive tapes, stickers, medical patches, release paper for physical properties like, combined cover, metal foil, diaphragm, backing material, non-woven fabric, rubber, paper and other products. For more information please visit www.labthink.com, or contact us by the following means. Jinan Labthink Instruments Co., Ltd. looks forward to further communication and cooperation with enterprises and institutions in the industry.
Jinan Labthink Instrument Co., Ltd.
No.144 Wuyingshan Road, Jinan, Shandong
Phone: 0531-85068566
Fax: 0531-85062108

Submitted by:Labthink Instruments
Disclaimer: Pressbox disclaims any inaccuracies in the content contained in these releases. If you would like a release removed please send an email to remove@pressbox.com together with the url of the release.